Safety Helmets

Approx. Rs 300 / PieceGet Latest Price

• Bump caps can be used to protect the user against injuries caused by accidental bumping against fixed and hard objects.
  Bump caps are lightweight protective helmets that can be worn for extended periods of time without exhaustion. The purpose of the design is to protect the user against accidental bumping against fixed and hard objects such as racks, beams, suspended objects in the workplace, and other relevant injuries when the wearer is engaged in walking, raising the head, lowering the head, bending over, or other forms of movement.
  The bump cap is inadequate against impact caused by objects falling from a great height.In workplaces with such risks, such as construction yards, the bump cap should not be worn and instead should be replaced with the safety helmet.
• Shock absorption- In the event of impact, the 4-point harness design is capable of improving the distribution of the force over the entire head to reduce the damage caused by the impact.
  According to standard testing methods provided in European standard, a standard 5 kg striker is dropped from a height of 250 mm to hit the safety helmet. The helmet should afford sufficient protection to the wearer’s head and ensure that the force of impact transmitted to the head does not exceed 15kN.

Approx. Rs 650 / PieceGet Latest Price

A safety helmet with a torch (headlamp) is a protective helmet designed for construction, mining, firefighting, industrial work, and emergency response. It provides head protection along with hands-free lighting for working in low-light conditions.

• ANSI Z89.1-2014 – American National Standard for Industrial Head Protection
• EN 397:2012 – European Standard for Industrial Safety Helmets
• IS 2925:1984 – Indian Standard for Industrial Safety Helmets
• OSHA 29 CFR 1910.135 – Occupational Safety and Health Administration Helmet Regulations
• ATEX Certified (For Explosive Environments) – Required for mining and oil & gas industries

• Light Source:

  • LED (Light Emitting Diode) – Energy-efficient, long lifespan
  • High-Intensity COB LED – Brighter illumination with a wide beam

• Brightness (Lumens):

  • 100 to 500 lumens for general use
  • 500+ lumens for mining, rescue, and industrial applications

• Beam Distance:

  • Up to 200 meters (650 feet) depending on model

• Power Source:

  • Rechargeable Battery (Li-Ion or Ni-MH) – Long-lasting, USB charging
  • AA/AAA Alkaline Batteries – Easily replaceable in remote locations

• Battery Life:

  • 6 to 12 hours on full charge
  • Multiple modes (High, Low, Strobe, SOS)

• Mounting & Adjustability:

  • Adjustable Angle (45° to 90° tilt) for directional lighting
  • Detachable Headlamp – Can be used separately if needed

• Waterproof & Impact Resistance:

  • IP65/IP67 Rating – Water-resistant for rain and wet conditions
  • Drop Test Resistance (2m) – Shockproof for rough environments

Approx. Rs 340 / PieceGet Latest Price

An industrial safety helmet is a protective headgear designed to protect workers from impact, penetration, electrical hazards, and falling objects in construction, manufacturing, and industrial environments.

• ANSI Z89.1-2014 (USA) – Industrial Head Protection
• EN 397:2012 (Europe) – Industrial Safety Helmets
• IS 2925:1984 (India) – Safety Helmets for Industrial Use
• OSHA 29 CFR 1910.135 – Occupational Safety and Health Administration Helmet Regulations

• Class G (General): Protects against impact and low-voltage electrical hazards (up to 2,200V)
• Class E (Electrical): Protects against high-voltage electrical hazards (up to 20,000V)
• Class C (Conductive): Provides impact protection but no electrical protection

Approx. Rs 340 / PieceGet Latest Price

Industrial caps come in a variety of types, materials, and specifications depending on their application. Below are key specifications to consider when selecting industrial caps.

• Gasket / O-Ring Seals – For leak-proof applications.
• Vent Holes – Prevents vacuum formation.
• UV Resistance – For outdoor applications.
• Chemical Resistance – Suitable for exposure to acids, oils, or solvents.